The published listing for this build is deliberately short on figures, so the useful way to read it is by category and body type rather than by data sheet. What follows explains what this class of vehicle is expected to do, the configuration decisions that move the price, and the questions that settle the specification before production starts.
We have kept the language practical: figures first, then interpretation, then the questions to put to the supplier. That is the order in which these decisions are usually made.
Manufacturer listing: Red and Black Heavy-duty Farm UTV, with Rear Cargo Box and Two-seat Guardrail, All-terrain Vehicle for Farm Cargo Transportation — see the full gallery, options and quotation form on the product page.
| Category | Electric Patrol Vehicle |
| Build features | with Cargo Box, Off-Road |
| Origin | Zhuhai, Guangdong, China |
What the Electric Patrol Vehicle with Cargo Box is
The Electric Patrol Vehicle with Cargo Box sits in the light end of the low-speed electric vehicle category: four wheels, a governed top speed, an on-board charger and a body sized for paths, walkways and internal roads rather than public highways. That framing matters, because it decides which regulations apply, who can drive it and where it can legally operate.
The practical consequence is a vehicle that is cheap per kilometre, quiet enough for residential and hospitality routes, and narrow enough to pass a service gate without removing a mirror.
Specification at a glance
The table below lists the parameters published for this build. Where a figure is not published, the row has been left out rather than estimated — a short table is more useful than an invented one.
| Parameter | Value | Why it matters |
|---|---|---|
| Body configuration | with Cargo Box, Off-Road | Determines weather protection, passenger comfort and the resale profile. |
| Charging | On-board charger, mains input | Ask for the input voltage for your market: 110V and 220V builds are both produced. |
| Steering | Wheel steering, left or right hand drive | Right-hand drive matters in the UK, Australia, South Africa and parts of Southeast Asia. |
Figures above are taken from the manufacturer listing for this model. Final data sheets are issued per build, because battery chemistry, controller setting and body length all move with the configuration.
How the drive system works
Four subsystems decide how a vehicle of this class behaves: the battery pack, the motor, the controller and the charger. They are matched as a set, which is why swapping one of them without touching the others usually produces a vehicle that is worse than the original.
Battery pack
The pack is the single largest cost line in the vehicle, so it is also the first thing buyers try to downgrade. That trade is defensible only if the duty cycle is short and the charging window is long; on a multi-shift site it usually ends in an early replacement.
Motor and controller
Most vehicles in this class use a brushless AC motor paired with a solid-state controller. The controller is where the driving character is set: acceleration ramp, top-speed limit and regenerative braking are all parameters, not hardware. Ask whether those parameters are locked before delivery — an unlocked controller is convenient for a technician and a liability for a fleet.
Charging
Every unit ships with an on-board charger, so the vehicle only needs a mains supply of the correct voltage and a circuit that can carry the charging current for several hours without sharing a socket with anything else. Two practical rules: keep the charging bay ventilated, and size the cable run for continuous load rather than for the charger nameplate alone.
What the voltage figure actually tells you
System voltage is the quiet specification: it decides cable size, controller heat and how much torque the motor can produce at low speed. Buyers comparing two otherwise identical vehicles should compare voltage before comparing price.
Body, chassis and passenger comfort
Two body families dominate: open-sided vehicles for warm climates and short hops, and enclosed cabins for all-weather duty. Enclosed builds add weight, which is why the specification should always be read together with the range figure rather than on its own.
Ask for the frame treatment and the paint system in writing. On coastal sites and in humid climates, that single line in the specification decides whether the vehicle still looks presentable in year four.
Where it fits on site
The same vehicle can be a good decision on one site and a poor one on the next. These are the environments where this configuration is most often deployed, and what each one asks of the build.
Urban Management
Loads are light but constant, and the vehicle returns to the same bay every night. That pattern suits opportunity charging during breaks and makes a smaller pack economically rational.
Residential Communities
Weather exposure is the main constraint. Enclosed cabins, roof extensions and mudguard coverage are the options that decide whether the vehicle is usable in the rainy season or parked for it.
Scenic Areas
Staff turnover is high in this segment, so controls that behave like a car — wheel steering, a brake pedal in the expected place, a simple forward-reverse selector — reduce training time and minor damage.
Campus Security
Routes here are short, repetitive and often shared with pedestrians. A governed low-speed vehicle fits the traffic mix better than a van, and the narrow footprint lets it use service paths that were designed for hand carts.
Airport Perimeters
The duty cycle is characterised by frequent stops, long idle periods with the motor live, and a driver who leaves the vehicle unattended. Reliability of the controller and the condition of the battery pack matter more here than headline range.
Industrial Parks
This is a visibility application as much as a transport one. Livery, lighting and a recognisable silhouette do real work, which is why operators in this segment tend to specify signage, beacons and audio equipment at the same time as the vehicle.
This particular build is listed by the manufacturer for farms work, which is consistent with the seating and body configuration above.
Customization options
Factories in this segment are set up for small-batch customization, and most of the options below are available from a single unit upward. The items that genuinely change the engineering are marked; the rest are cosmetic or bolt-on and can be decided late.
- Signage and branding panel — Removable side panels for sponsor or departmental livery.
- Seat layout and trim — Bench, individual seats, vinyl or leatherette, armrests and grab handles.
- Cargo box or flatbed ★ — Rear box, pickup bed or tool tray; changes the wheelbase on some builds.
- Charging accessories — Spare charger, extension leads rated for continuous load, charging post.
- Roof and weather protection ★ — Hard roof, soft canopy, side curtains, enclosed cabin with doors and wipers.
- Right-hand drive ★ — Steering position change for RHD markets — specify before production, not after.
- Lighting and warning equipment — LED headlights, beacon bar, siren and PA, work lights for night duty.
What to confirm before you order
Most first-order problems are avoidable with a short list of questions. These are the ones worth putting in writing before a deposit, because the answers become the reference point if anything arrives differently.
- Confirm the battery chemistry, capacity and brand, and whether the pack is serviceable cell by cell.
- Agree the spares kit and the warranty terms — what is covered, for how long, and who pays freight on a claim.
- Ask for the frame treatment and paint system, especially for coastal or humid sites.
- Ask for the actual data sheet of the exact build you are buying — not the brochure of the series.
- Get the production lead time in writing, and the shipping port and terms (FOB, CIF or DAP).
- Ask which controller parameters are set at the factory and whether they are locked on delivery.
- Confirm the charger input voltage for your market and whether a spare charger is included.
Delivery, compliance and support
Vehicles in this class normally ship as special equipment rather than as passenger cars, packed in a container with the charger and loose parts crated separately. That classification affects the customs documents, the freight rate and, on some routes, the registration route at destination. Confirm the HS code and the certificate of origin with the supplier before the container is booked.
On compliance, ask specifically which certificate number applies to the build you are buying and whether the certificate covers your market. A CE or EEC document issued for one configuration does not automatically cover a different body length or battery chemistry. After-sales support is usually delivered remotely — wiring diagrams, controller fault codes, video guidance and spare parts shipped by air — so it is worth agreeing the response time at quotation stage, in writing.
Frequently asked questions
Q: What does the warranty usually cover?
A: Typically the frame and drivetrain for a defined period, with the battery covered separately and pro-rated by capacity loss rather than by failure alone. Ask for the warranty in writing with the exclusions listed, and confirm who pays freight on a claim — that clause decides whether the warranty is usable in practice.
Q: Lead-acid or lithium — which should I choose?
A: Lead-acid is cheaper to buy and heavier to live with. Lithium iron phosphate costs more up front, lasts roughly twice as many cycles, weighs far less and tolerates partial charging. On a single daily shift with a long overnight window, lead-acid can be rational. On two shifts, hilly terrain or a site where charging time is scarce, lithium is usually the cheaper decision over the life of the vehicle.
Q: What is the minimum order quantity?
A: Most factories in this segment quote from one unit, with the price per unit falling as the batch grows because tooling and freight are spread over more vehicles. Mixed containers — several configurations in one shipment — are common and worth asking about if you are buying for more than one site.
Q: How do I compare two quotes that look identical?
A: Compare the battery brand and chemistry, the controller make, the frame treatment, the charger input voltage and what is included in the spares kit. Identical-looking quotes usually differ in exactly those five places, and each one moves the real cost more than the headline price does.
Q: Can the factory build it to our own design?
A: Yes, and this is the normal way of buying in this segment rather than the exception. Colour, livery, seating, roof type, cargo body, warning equipment and steering position are all specified per order. The options that change the engineering — battery, body length, drive position — have to be fixed before production, while cosmetic items can be approved later.
Summary
For a fleet manager, the useful question is not which vehicle is cheapest per unit, but which configuration removes the most downtime over five years. That answer is usually found in the battery, the charger and the spares kit rather than in the price list.
Full specification, gallery and quotation for this model: Electric Patrol Vehicle with Cargo Box. More models in the same range: Electric Patrol Vehicle. For pricing, lead time and customization, use the contact form or message the factory directly on WhatsApp.
Electric Patrol Vehicle Low-speed electric vehicle LSEV OEM / ODM Zhuhai Kaitu
