This model is a low-speed electric vehicle built for a working day of short, repeated trips. The published figures for this build read: a 6-seat layout and a 48V electrical system. Everything below explains what those numbers mean in operation, which options actually change the price, and what to confirm before a deposit is paid.
We have kept the language practical: figures first, then interpretation, then the questions to put to the supplier. That is the order in which these decisions are usually made.
Manufacturer listing: 48v 5kw 6 Seater Electric Atv Utv Four-wheel Sightseeing Touring Car Patrol Car Golf Cart — see the full gallery, options and quotation form on the product page.
| Category | Electric Golf Cart |
| Seating | 6 persons |
| System voltage | 48 V |
| Build features | Golf Buggy |
| Origin | Zhuhai, Guangdong, China |
What the 6-Seat 48V Electric Golf Cart Golf Buggy is
Broadly speaking, this is a purpose-built electric utility platform rather than a converted passenger car. The chassis, motor and controller are matched at the factory for continuous low-speed duty, which is why these vehicles tolerate eight to ten hours of stop-start work that would wear out a road car within a season.
What it is not: a highway vehicle. Range, braking distance and crash structure are all engineered for the site speeds it was designed around, and using it outside that envelope is where most operating problems begin.
Specification at a glance
The table below lists the parameters published for this build. Where a figure is not published, the row has been left out rather than estimated — a short table is more useful than an invented one.
| Parameter | Value | Why it matters |
|---|---|---|
| Seating capacity | 6 persons | Sets the crew size per trip and the insurance and licensing argument for the site. |
| System voltage | 48 V | Higher voltage means lower current for the same power, so thinner cabling, less heat and better hill-climbing headroom. |
| Body configuration | Golf Buggy | Determines weather protection, passenger comfort and the resale profile. |
| Charging | On-board charger, mains input | Ask for the input voltage for your market: 110V and 220V builds are both produced. |
| Steering | Wheel steering, left or right hand drive | Right-hand drive matters in the UK, Australia, South Africa and parts of Southeast Asia. |
Figures above are taken from the manufacturer listing for this model. Final data sheets are issued per build, because battery chemistry, controller setting and body length all move with the configuration.
How the drive system works
Four subsystems decide how a vehicle of this class behaves: the battery pack, the motor, the controller and the charger. They are matched as a set, which is why swapping one of them without touching the others usually produces a vehicle that is worse than the original.
Battery pack
The pack is the single largest cost line in the vehicle, so it is also the first thing buyers try to downgrade. That trade is defensible only if the duty cycle is short and the charging window is long; on a multi-shift site it usually ends in an early replacement.
Motor and controller
The motor is rated for continuous low-speed duty rather than peak output, which is why the published power figure looks modest next to a passenger car. Thermal headroom, not horsepower, is the number that matters when a vehicle climbs the same ramp forty times a day.
Charging
Every unit ships with an on-board charger, so the vehicle only needs a mains supply of the correct voltage and a circuit that can carry the charging current for several hours without sharing a socket with anything else. Two practical rules: keep the charging bay ventilated, and size the cable run for continuous load rather than for the charger nameplate alone.
What the voltage figure actually tells you
At 48V this build sits in the range where a modest current still delivers useful torque, so the cabling stays manageable and the controller runs cooler than on a 48V equivalent. It also means the charger, the DC-DC converter and the battery pack are all part of one matched set — replacing the pack with a different voltage later is not a plug-and-play job.
Body, chassis and passenger comfort
Two body families dominate: open-sided vehicles for warm climates and short hops, and enclosed cabins for all-weather duty. Enclosed builds add weight, which is why the specification should always be read together with the range figure rather than on its own.
Ask for the frame treatment and the paint system in writing. On coastal sites and in humid climates, that single line in the specification decides whether the vehicle still looks presentable in year four.
Where it fits on site
The same vehicle can be a good decision on one site and a poor one on the next. These are the environments where this configuration is most often deployed, and what each one asks of the build.
Event Venues
This is a visibility application as much as a transport one. Livery, lighting and a recognisable silhouette do real work, which is why operators in this segment tend to specify signage, beacons and audio equipment at the same time as the vehicle.
Private Estates
Loads are light but constant, and the vehicle returns to the same bay every night. That pattern suits opportunity charging during breaks and makes a smaller pack economically rational.
Marinas
Weather exposure is the main constraint. Enclosed cabins, roof extensions and mudguard coverage are the options that decide whether the vehicle is usable in the rainy season or parked for it.
Resorts
Staff turnover is high in this segment, so controls that behave like a car — wheel steering, a brake pedal in the expected place, a simple forward-reverse selector — reduce training time and minor damage.
Customization options
Factories in this segment are set up for small-batch customization, and most of the options below are available from a single unit upward. The items that genuinely change the engineering are marked; the rest are cosmetic or bolt-on and can be decided late.
- Roof and weather protection ★ — Hard roof, soft canopy, side curtains, enclosed cabin with doors and wipers.
- Lighting and warning equipment — LED headlights, beacon bar, siren and PA, work lights for night duty.
- Tires and suspension — Turf-friendly tires for golf courses, all-terrain tires for gravel and yard duty.
- Seat layout and trim — Bench, individual seats, vinyl or leatherette, armrests and grab handles.
- Body colour and livery — Painted panels with customer logos; usually the cheapest way to make a fleet look deliberate.
- Right-hand drive ★ — Steering position change for RHD markets — specify before production, not after.
- Cargo box or flatbed ★ — Rear box, pickup bed or tool tray; changes the wheelbase on some builds.
Fleet sizing and charging
Fleet sizing starts with the route, not the budget. Take the longest loop, the number of trips per shift and the turnaround time at each stop, then add the charging window. Most sites that feel short of vehicles are actually short of charging capacity.
- Trips per hour: loop length divided by average site speed, plus a fixed dwell time at each stop.
- Units required: peak simultaneous demand plus one spare for every eight vehicles in service.
- Charging window: hours available between shifts; if it is shorter than the recharge time, you need either a bigger pack or a second bay.
- Power supply: confirm the site can deliver the charging current continuously, not just at the socket.
- Storage: covered parking extends pack life in hot climates more than any other single measure.
- Growth margin: specify the charger and the bay for the fleet you expect in two years, not the fleet you are buying today.
The arithmetic is deliberately simple because the variables are. What breaks fleet plans is not the math — it is discovering in month two that the charging bays share a circuit with the workshop compressor.
Delivery, compliance and support
Vehicles in this class normally ship as special equipment rather than as passenger cars, packed in a container with the charger and loose parts crated separately. That classification affects the customs documents, the freight rate and, on some routes, the registration route at destination. Confirm the HS code and the certificate of origin with the supplier before the container is booked.
On compliance, ask specifically which certificate number applies to the build you are buying and whether the certificate covers your market. A CE or EEC document issued for one configuration does not automatically cover a different body length or battery chemistry. After-sales support is usually delivered remotely — wiring diagrams, controller fault codes, video guidance and spare parts shipped by air — so it is worth agreeing the response time at quotation stage, in writing.
Frequently asked questions
Q: Can the factory build it to our own design?
A: Yes, and this is the normal way of buying in this segment rather than the exception. Colour, livery, seating, roof type, cargo body, warning equipment and steering position are all specified per order. The options that change the engineering — battery, body length, drive position — have to be fixed before production, while cosmetic items can be approved later.
Q: How is the vehicle shipped?
A: Usually by sea in a container, partly assembled to fit, with the charger and loose parts crated alongside. Assembly on arrival is limited to fitting wheels, mirrors, seats and the roof where applicable. Air freight is possible for a single urgent unit but rarely economic for a fleet.
Q: What spares should we keep on site?
A: A practical minimum is one charger, one controller, a set of brake parts, lamps, fuses, a spare wheel and a set of fasteners. Sites that keep this kit running report far less downtime than sites that order parts after a failure, simply because the air-freight lead time is removed from the repair.
Q: Lead-acid or lithium — which should I choose?
A: Lead-acid is cheaper to buy and heavier to live with. Lithium iron phosphate costs more up front, lasts roughly twice as many cycles, weighs far less and tolerates partial charging. On a single daily shift with a long overnight window, lead-acid can be rational. On two shifts, hilly terrain or a site where charging time is scarce, lithium is usually the cheaper decision over the life of the vehicle.
Q: What licence is needed to drive this vehicle?
A: It depends on the market and on how the vehicle is registered. In many jurisdictions a low-speed electric vehicle used on private land needs no road licence at all, while public-road use triggers registration, insurance and a driving licence requirement. Confirm the local rule before ordering, because the answer can change the specification — lights, mirrors, seat belts and a speed limiter are all part of the road-legal build.
Summary
For a fleet manager, the useful question is not which vehicle is cheapest per unit, but which configuration removes the most downtime over five years. That answer is usually found in the battery, the charger and the spares kit rather than in the price list.
Full specification, gallery and quotation for this model: 6-Seat 48V Electric Golf Cart Golf Buggy. More models in the same range: Electric Golf Cart. For pricing, lead time and customization, use the contact form or message the factory directly on WhatsApp.
Electric Golf Cart Low-speed electric vehicle LSEV OEM / ODM Zhuhai Kaitu 6-seat 48V
