This model is a low-speed electric vehicle built for a working day of short, repeated trips. The published figures for this build read: a 72V electrical system and 80-100 km of range per charge. Everything below explains what those numbers mean in operation, which options actually change the price, and what to confirm before a deposit is paid.
The guide below follows the order a fleet manager usually works in: understand the platform, check the specification, match it to the site, then decide on the build. Nothing here replaces the factory data sheet — it tells you which lines on that sheet matter.
Manufacturer listing: 2023 Beemotors Luxury 72V Electric Sightseeing Shuttle New Model 14 Sets 80-100km Range CE Certified Electric Bus Tourist Car — see the full gallery, options and quotation form on the product page.
| Category | Electric Vintage Sightseeing Car |
| System voltage | 72 V |
| Range per charge | 80-100 km |
| Build features | Street Legal |
| Origin | Zhuhai, Guangdong, China |
What the 72V Electric Vintage Sightseeing Car is
In the Chinese LSEV market this model belongs to the class sold to operators rather than consumers: buyers are usually site managers, security contractors, resort engineers or procurement teams comparing several factories at once.
The practical consequence is a vehicle that is cheap per kilometre, quiet enough for residential and hospitality routes, and narrow enough to pass a service gate without removing a mirror.
Specification at a glance
The table below lists the parameters published for this build. Where a figure is not published, the row has been left out rather than estimated — a short table is more useful than an invented one.
| Parameter | Value | Why it matters |
|---|---|---|
| System voltage | 72 V | Higher voltage means lower current for the same power, so thinner cabling, less heat and better hill-climbing headroom. |
| Range per charge | 80-100 km | Compare against the longest daily route plus a 30% reserve, not against the marketing figure. |
| Body configuration | Street Legal | Determines weather protection, passenger comfort and the resale profile. |
| Charging | On-board charger, mains input | Ask for the input voltage for your market: 110V and 220V builds are both produced. |
| Steering | Wheel steering, left or right hand drive | Right-hand drive matters in the UK, Australia, South Africa and parts of Southeast Asia. |
Figures above are taken from the manufacturer listing for this model. Final data sheets are issued per build, because battery chemistry, controller setting and body length all move with the configuration.
How the drive system works
Four subsystems decide how a vehicle of this class behaves: the battery pack, the motor, the controller and the charger. They are matched as a set, which is why swapping one of them without touching the others usually produces a vehicle that is worse than the original.
Battery pack
Lead-acid deep-cycle packs remain the cheapest way into this class and are still common on short-route duties where the vehicle returns to the same bay every night. Lithium iron phosphate (LiFePO4) packs cost more up front but carry roughly twice the usable cycles, weigh considerably less, and accept opportunity charging without the same penalty.
Motor and controller
The motor is rated for continuous low-speed duty rather than peak output, which is why the published power figure looks modest next to a passenger car. Thermal headroom, not horsepower, is the number that matters when a vehicle climbs the same ramp forty times a day.
Charging
Every unit ships with an on-board charger, so the vehicle only needs a mains supply of the correct voltage and a circuit that can carry the charging current for several hours without sharing a socket with anything else. Two practical rules: keep the charging bay ventilated, and size the cable run for continuous load rather than for the charger nameplate alone.
What the voltage figure actually tells you
At 72V this build sits in the range where a modest current still delivers useful torque, so the cabling stays manageable and the controller runs cooler than on a 48V equivalent. It also means the charger, the DC-DC converter and the battery pack are all part of one matched set — replacing the pack with a different voltage later is not a plug-and-play job.
Body, chassis and passenger comfort
Operators underestimate comfort at their own cost. A bench that is acceptable for a ten-minute tour becomes a complaint after the fourth hour, and a cab without airflow turns a summer shift into a retention problem. Seat foam density, step-in height and roof shading are the three cheapest upgrades a buyer can specify.
Ask for the frame treatment and the paint system in writing. On coastal sites and in humid climates, that single line in the specification decides whether the vehicle still looks presentable in year four.
Where it fits on site
The same vehicle can be a good decision on one site and a poor one on the next. These are the environments where this configuration is most often deployed, and what each one asks of the build.
Tourism Landmarks
The duty cycle is characterised by frequent stops, long idle periods with the motor live, and a driver who leaves the vehicle unattended. Reliability of the controller and the condition of the battery pack matter more here than headline range.
Film Production
This is a visibility application as much as a transport one. Livery, lighting and a recognisable silhouette do real work, which is why operators in this segment tend to specify signage, beacons and audio equipment at the same time as the vehicle.
Wine Estates
Loads are light but constant, and the vehicle returns to the same bay every night. That pattern suits opportunity charging during breaks and makes a smaller pack economically rational.
Historic Districts
Weather exposure is the main constraint. Enclosed cabins, roof extensions and mudguard coverage are the options that decide whether the vehicle is usable in the rainy season or parked for it.
This particular build is listed by the manufacturer for scenic areas work, which is consistent with the seating and body configuration above.
Customization options
Factories in this segment are set up for small-batch customization, and most of the options below are available from a single unit upward. The items that genuinely change the engineering are marked; the rest are cosmetic or bolt-on and can be decided late.
- Battery chemistry and capacity ★ — Lead-acid or LiFePO4, and pack size. This is the option with the largest effect on price, weight and range.
- Right-hand drive ★ — Steering position change for RHD markets — specify before production, not after.
- Cargo box or flatbed ★ — Rear box, pickup bed or tool tray; changes the wheelbase on some builds.
- Roof and weather protection ★ — Hard roof, soft canopy, side curtains, enclosed cabin with doors and wipers.
- Charging accessories — Spare charger, extension leads rated for continuous load, charging post.
- Tires and suspension — Turf-friendly tires for golf courses, all-terrain tires for gravel and yard duty.
- Lighting and warning equipment — LED headlights, beacon bar, siren and PA, work lights for night duty.
What to confirm before you order
Most first-order problems are avoidable with a short list of questions. These are the ones worth putting in writing before a deposit, because the answers become the reference point if anything arrives differently.
- Ask which controller parameters are set at the factory and whether they are locked on delivery.
- Ask for the frame treatment and paint system, especially for coastal or humid sites.
- Get the production lead time in writing, and the shipping port and terms (FOB, CIF or DAP).
- Ask for the documentation the vehicle ships with: invoice, packing list, certificate of origin, and any compliance certificate claimed.
- Confirm the battery chemistry, capacity and brand, and whether the pack is serviceable cell by cell.
- Confirm the charger input voltage for your market and whether a spare charger is included.
- Ask for the actual data sheet of the exact build you are buying — not the brochure of the series.
Delivery, compliance and support
Vehicles in this class normally ship as special equipment rather than as passenger cars, packed in a container with the charger and loose parts crated separately. That classification affects the customs documents, the freight rate and, on some routes, the registration route at destination. Confirm the HS code and the certificate of origin with the supplier before the container is booked.
On compliance, ask specifically which certificate number applies to the build you are buying and whether the certificate covers your market. A CE or EEC document issued for one configuration does not automatically cover a different body length or battery chemistry. After-sales support is usually delivered remotely — wiring diagrams, controller fault codes, video guidance and spare parts shipped by air — so it is worth agreeing the response time at quotation stage, in writing.
Frequently asked questions
Q: How long does a full charge take?
A: Charge time is the pack capacity divided by the charger output, plus a taper at the end of the cycle. A pack that runs a full shift will typically need most of an overnight window to reach full charge on the standard on-board charger; higher-output external chargers shorten that but need a supply that can carry the current continuously.
Q: Can it be used on public roads?
A: Only if it is built and registered for that use. Low-speed electric vehicles are governed to a low top speed and are generally intended for private roads, campuses, resorts and closed sites. Where public-road use is allowed, the specification changes to include lighting, mirrors, seat belts and a documented speed limit.
Q: What is the minimum order quantity?
A: Most factories in this segment quote from one unit, with the price per unit falling as the batch grows because tooling and freight are spread over more vehicles. Mixed containers — several configurations in one shipment — are common and worth asking about if you are buying for more than one site.
Q: Can the factory build it to our own design?
A: Yes, and this is the normal way of buying in this segment rather than the exception. Colour, livery, seating, roof type, cargo body, warning equipment and steering position are all specified per order. The options that change the engineering — battery, body length, drive position — have to be fixed before production, while cosmetic items can be approved later.
Q: How do I compare two quotes that look identical?
A: Compare the battery brand and chemistry, the controller make, the frame treatment, the charger input voltage and what is included in the spares kit. Identical-looking quotes usually differ in exactly those five places, and each one moves the real cost more than the headline price does.
Summary
None of the numbers above is unusual for the class. What separates a good purchase from an expensive one is the match between the build and the route it will work, and the discipline of confirming that match on paper before the deposit is paid.
Full specification, gallery and quotation for this model: 72V Electric Vintage Sightseeing Car. More models in the same range: Electric Vintage Sightseeing Car. For pricing, lead time and customization, use the contact form or message the factory directly on WhatsApp.
Electric Vintage Sightseeing Car Low-speed electric vehicle LSEV OEM / ODM Zhuhai Kaitu 72V
